From idea to working hardware.
In one place.
Describe what you want to build. Tinkered generates the firmware, wiring, and build guide — then simulates everything in 3D before you touch a single wire.
Idea in. Working hardware out.
Describe your project. Get production-ready code.
Describe what you want your hardware to do. Tinkered generates the firmware, wiring diagram, parts list, and step-by-step assembly guide — all in seconds.
Everything to go from idea to real hardware.
AI Hardware Agent
Describe any project in plain English. Tinkered instantly generates the components, wiring, firmware code, and assembly instructions with no engineering degree required.
Dual Simulation Engine
Real firmware execution meets analog electrical physics, running simultaneously in the same photorealistic 3D environment. No other platform does both.
Photorealistic 3D Environment
Every component rendered at real-world scale with accurate materials and lighting. See your hardware exactly as it will look on your desk before you order a single part.
Complete Code Generation
Production-ready firmware for Arduino, ESP32, and Raspberry Pi Pico. Clean, commented, and ready to flash, generated automatically alongside your hardware design.
Wiring & Schematics
Auto-generated wiring diagrams and component specifications for every project. Know exactly what connects where, with the right resistor values, pin mappings, and power rails.
Waveform Viewer
Visualize voltage, current, and signal behavior across any node in real time. Catch electrical faults, wrong biasing, and component stress before they become physical problems.
Step-by-Step Assembly
Detailed assembly instructions generated with every project. From first component to final connection, know exactly what to do and in what order.
One-Click Deploy
Flash your firmware directly to your board with a single click. From simulation to running hardware in seconds with no terminal, no toolchain setup, and no guesswork.
1,300+ boards. 33 platforms. One workspace.
Generate firmware and compile for any board. If it exists, Tinkered builds for it.
Full 3D simulation available for Arduino, with more boards being added.
Still have questions? We've got you.
Tinkered doesn't just generate. It validates. Every circuit runs through electrical analysis before you see it. If there's a short circuit, wrong resistor value, or voltage mismatch, the simulator catches it automatically. You never receive a design that would fail silently.
Yes. The simulator runs your actual firmware on a virtual microcontroller with real electrical physics. Components respond exactly as they would on your desk. If something would fail in real life, it fails in the simulation first, before you buy a single part.
For every project, Tinkered produces four things: production-ready firmware, a complete wiring diagram, a parts list with exact specifications, and step-by-step assembly instructions. Everything is editable, so you can modify any output manually to fine-tune your design.
Absolutely. Write your own firmware, paste existing code, or start from a template. The simulator runs whatever code you give it, whether AI-generated or hand-written. You can also let the AI generate a starting point and modify it freely from there.
Every supported component is modeled with real behavior. LCDs display actual text from your code, LEDs respond to PWM brightness, sensors return realistic values, and motors react to control signals. The 3D environment shows your circuit exactly as it would look assembled on a real breadboard.